RONVIG DENTAL COMPO-JECT Gebrauchsanleitung

COMPO-JECT
Applicator
Operating Instructions
Gebruiksaanwijzing
Mode d'emploi
Gebrauchsanleitung
Brugervejledning
20003
OPERATING INSTRUCTIONS
COMPO - JECT
TM
Applicator for dental materials in prefilled unit-dose tips for direct oral application.
Insert an unit-dose tip into the clip-in-lock at the front part of the applicator.

Make sure that the tip is fully inserted.
For easy placement of the material, the tip can be rotated in the required direction.

Activate the lever at all times while using the applicator in the oral cavity. This will cause the piston

to lock the unit-dose tip and thus prevent unintentional rotation or release of the tip.
Release the tip from the clip-in-lock by pressing the front part of the tip downwards (Fig. a).

Cleaning and Sterilization
COMPO-JECT can be cleaned and sterilized by any method up to 180°C/356°F.
TM
Materials
COMPO-JECT is made from high grade, acid-resistant stainless steel.
TM
Guarantee
COMPO-JECT is covered by a 5-year material and construction guarantee.
TM
Damages due to inadequate care or incorrect handling are not covered by the warranty.
RØNVIG Dental Mfg. A/S . Gl. Vejlevej 59 . DK-8721 Daugaard . Denmark
Tel.: +45 70 23 34 11 . Fax: +45 76 74 07 98 . E-mail: export@ronvig.com . www.ronvig.com
en nl
TM
IMPORTANT NOTE:
COMPO-JECT™
IS DESIGNED FOR
PRE-FILLED TIPS ONLY
COMPO-JECT™ is intended for the
direct application of medium-high
viscosity composites in pre-loaded
unit dose tips.
The Clip-in-lock is not suitable for use
with self-filled tips as leakage may
impair the moving parts of the device.
fr de da
en
Fig. a
↓