Initial Setup - Vintage Vinyl VV-SV-TT-xxV2 Bedienungsanleitung

• 45 RPM adapter holder – Holds the included 45 RPM adapter. When not using the
1
adapter, please place it in this holder
• Tone arm – Lift lever
2
• Auto Stop & ON/OFF control
3
• 33 / 45 / 78 RPM switch – This switch controls the RPM of the turntable platter.
4
• Power ON/OFF and volume control.
5
• Headphone 3.5 mm stereo port
6
• Tone arm – The turntable comes with a ready to use pre-balanced tone arm and
7
cartridge. The tone arm can be raised and lowered by hand, or by using the raise / lower
lever . Please note: the tone arm needs to be moved away from resting position (on
2
the arm clip) for the turntable motor to activate when Auto Stop is ON.
• Speakers
8
• Line in port (3.5 mm) – For connecting your Smartphone, Tablet, MP3 or other Digital
9
Audio Player
• Line out port (RCA) Right Channel – Use to connect to external amplifier or speakers
10
• Line out port (RCA) Left Channel – Use to connect to external amplifier or speakers
11
• Power Adaptor connection port
12

INITIAL SETUP

• Make sure that the mains voltage is compatible with the operation voltage of the Power
Adapter.
• Connect the Power Adapter in the wall socket.
• Connect the DC plug for Power into the Power Adapter connection port
LISTENING TO A RECORD
• Lift the buckle on the front of the turntable and open the lid.
• Turn the power & volume control knob clockwise.
• Place a record on the turntable platter and select the desired speed (33/45/78)
to the record. NOTE: when playing a 45 rpm record, use the included 45 rpm adapter
• Open the tone arm clip to release the tone arm
the tone arm and gently move the tone arm to the desired position over the record. The
turntable will begin to spin when the arm is moved toward the record. Push the lift lever
forward lower the tone arm slowly onto the desired position on the record to begin playing the
record. Please note: The record will begin to spin only when the tone arm is moved over to
the record if the AUTO STOP is turned ON.
• If the AUTO STOP ON/OFF Switch
finished (For some vinyl records, it will stop when it the record did not come to the end, or it
will not stop when it comes to the end). This due to the position of the tone arm. If Auto Stop
Control is turned OFF, the record will NOT stop automatically when finished.
9 10 11
is turned ON, the record will stop automatically when
3
12
5
. Push the lift lever
7
12
according
4
.
1
backward to raise
2