Weather Forecast - Perel WC221 Bedienungsanleitung

Switching the Alarm On/Off
1.
2.
3.
4.
Using the Snooze Alarm
1.
2.
Setting the Display Brightness
At normal time display, press the snooze button to set the
display brightness.
Selecting the Temperature Unit
At normal time display, press

6.2 Weather Forecast

Synchronizing the Station and the Outdoor Unit
This weather station computes weather forecast based on
changes in air pressure. Using this set for the first time, it may
take up to 12 hours of collecting information before receiving
accurate forecasts.
1.
2.
When the outdoor temperature and humidity digits show ---, the
wireless transmission is either interrupted or lost. Press and hold
Reading the Max/Min Temperature and Humidity
1.
2.
3.
Displaying the Air Pressure Readout
At normal time display, press and hold MEM until the calendar
displays the air pressure readout in hPa. Press and hold again to
revert to normal time display.
V. 01 – 12/12/2019
Press AL1/2 once to switch on alarm 1.
Press AL1/2 twice to switch on alarm 2.
Press AL1/2 three times to switch on alarm 1 and 2.
Press AL1/2 a fourth time to switch off alarm 1 and 2.
When the alarm rings, press the snooze button once to
enter the snooze mode.
Press AL1/2 once to deactivate the alarm. The set alarm
will ring the next day.
At normal time display, press
channel as the outdoor unit's.
Press and hold
station is synchronizing with the outdoor unit. Wait for the
synchronization to finish.
again to re-synchronize the units.
Press MEM once to display the maximum recorded
temperature and humidity.
Press MEM once again to display the minimum recorded
temperature and humidity.
Press and hold MEM to reset the recorded values.
WC221
to select the temperature unit.
and select the same
. The icon will flash to indicate the
7 ©Velleman nv