jbc MN 9017 Bedienungsanleitung Seite 3

We appreciate the trust you have placed in JBC by purchasing this equipment. It
has been manufactured with the strictest quality standards in order to give you the
best possible service.
Before using this equipment, we recommend you read these instructions carefully.
Nitrogen Generator module MN 9017
(*) The gas concentration and gas flow N
Pressure (bar)
6
5
4
M N 9 0 1 7 i s a N i t r o g e n G a s G e n e r a t o r .
Nitrogen gas (N
compressed air through action of high-
performance separator membrane.
JBC reserves the right to make technical changes without prior notification.
Ref.9017000
99,9% 99,5%
0,35 0,73
0,27 0,57
0,18 0,43
) simply obtained from
2
Technical specifications
- Compresses air pressure of 4 inlets 4 to 6 bar
- Gas concentration up to 99,9 % (*)
- Recommended gas flow N
iron: 1 to 2 NL/min (*)
- Weight of complete unit: 2 Kgs.
- ESD protected housing.
Typical surface resistance: 10
square.
- Complies with CE standards on electrical
safety, electromagnetic compatibility and
antistatic protection.
- RoHS compliant.
This product should not be thrown in the
garbage.
generated depens on the inlet pressure:
2
Concentration N (%)
2
99% 98%
Gas flow N (NL/min)
2
1,00 1,37
0,80 1,13
0,58 0,82
Features of the compressed air:
- Dry air and without oil.
- Water filter of at least 0,01µm.
- Particles filter of at least 0,3µm.
2
ENGLISH
for one soldering
2
97% 96%
1,83 2,33
1,45 1,67
1,03 1,28
N output
2
Air input
5 11
-10 Ohms/
95%
2,67
2,00
1.52