On Screen Menu - videoone TFT9701 Benutzerhandbuch

On Screen Menu

Assignment of keys
The control buttons are located on the side of the monitor.
SELECT
With the button SELECT you can chose the input signal.
MENU
With the button MENU you will get into the main menu. If necessary, first activate the point OSD und chose a
language by activating the point LANGUAGE. More information on the buttons you can find in the chapter "On
Screen Menu" on the point "Assignment of keys". According to the input signal (BNC, VGA, HDMI) the settings
can deviate from each other.
1. FUNCTION
Here you can set some setting for the monitor.
1.1 SLEEP TIMER
Here you can set the automatically shutdown of the monitor.
1.2 KEY LOCK
You can lock / unlock the key lock function by the following steps: Press the button "MENU" at least for
three seconds. Release the button. Press the button "POWER".
1.3 PIXEL SHIFT
This function is to reduce the retention of image.
2. PICTURE
Here you can adjust settings like contrast, color or brightness. Furthermore you can scale the image
horizontal or vertical.
3. OSD
Here you can change the settings for the OSD menu.
3.1 LANGUAGE
Here you can chose a language.
3.2 H. POSITION
Here you can adjust the horizontal position of the OSD window.
3.3 V. POSITION
Here you can adjust the vertical position of the OSD window.
3.4 OSD TIMER
Here you can adjust the time of the OSD window display if it is not in use.
3.5 TRANSPARENT
Here you can adjust the transparency of the OSD window.
3.6 RECALL
Here you can recall the initial settings.
10
SELECT Choose input signal: Video (BNC) / PC (VGA) / HDMI
Confirm / activate sub menu
MENU Activate main menu
Leave sub menu / Exit main menu
UP up
DOWN down
POWER Turn power on / off