JILONG JL017010-3NPF Bedienungsanleitung Seite 2

10） Modifications made by the consumer to the original activity toy shall be carried
out according to the instructions of the manufacturer. Please do not use the
rope or net that the minimum diameter less than 2mm or the maximum length
more than 30cm.
3. STORAGE AND MAINTAIN
1）It is necessary to carry out checks and maintenance of the main parts
(crossbeams, suspensions, anchors etc.) at regular intervals, if these checks are
not carried out the activity toy could overturn or otherwise become a hazard.
Replace defective parts in accordance with the manufacturer's instructions.
2）It is of particular importance to carry out the maintenance operations and follow
and respect the supplied recommandations at the beginning of each season as
well as at regular intervals during the usage season.
3) Change the water of paddling pools frequently(particularly in hot weather) or
when noticeably contaminated,unclean water is harmful to the user's health.
4) Clean the product with clear water, then leave it in shady and cool place for
airing, fold it into original package and place it indoor for next use. Caution: Do
not use the alkali or acid detergent to clean product! Do not leave product
exposed under sunlight directly because it will shorten the using-life of
product.
4. REPAIR PATCH INSTRUCTION (Small pinhole and small puncture leaks can
be repaired with the included repair patch)
a) Locate the leak place.
b) Deflate and drain the water.
c) Clean the area surrounding the leakage and wipe up all water from the surface.
d) Take out the repair patch, cut it into required shape and size, which should be
litter larger than the leaking area, put the patch on leaking area and press firmly.
e) You can use it again after 30 minutes drying of the repaired position.
If the damage is bigger than 1" (2.5cm), we recommend using a Silicone or rubber
based glue for repair. Please read warning statement on glue prior to use.
Shanghai Jilong Plastic Products Co. Ltd.
No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China
Tel: +86-21-58942200 E-mail: info@jilong.com Web: www.jilong.com
2