RUSTA 922011980101 Gebrauchsanweisung Seite 3

BATTERY LOADING/UNLOADING
Remove the battery cover and insert the battery
into the battery cabinet with the negative polarity
downward, and then screw up the battery cover.
Briefly press any one button of the remote contol,
the LED indicator will be on, then it means that the
battery has been loaded successfully.
PAIRING
Flash!
Keep the button pressed for more than 3
seconds (but less than 6 seconds) and then re-
lease, when the LED indicator starts blinking, it
means that the receiver has entered into pairing
mode; go on to press the ON button of any row of
the remote control, and then the LED indicator
truns constantly on, it means that the pairing
3 sec
processs has been successfully made.
FUNCTION OF REMOTE CONTROL
ON
There are totally 3 rows of On/Off buttons
on the remote control. Each of the 3 rows
can turn On/Off the devices paired with
the row separately.
OFF
3