Excellent 600W Technische Informationen Seite 14

en
Indication of heater current working state
Functions
Heater has 1 fixed temperature setting (default temperature of 48° C) and an advanced range
of automatic switch off functions after 1-5 hours. This makes the product convenient and user-
-friendly - perfect for drying clothing and towels. The default heating temperature for the towel rail
can be set to any of the following values: 43, 48, 52, 55 or 60° C. A built-in temperature sensor
protects the towel rail from freezing in situations where the temperature falls below 5-7° C. The
LED diode next to the on/off button will flash recurrently, indicating that the anti-freeze protection
is active.
Heater use
The heater is turned on by pressing the on/off button. The LED diode at the on/off button lights up
when the heater is on and the regulator maintains the set heating temperature.
attention: the heater control panel turns the device on only when radiator temperature is lower
than the set temperature (default temperature of 48° C). On reaching the required temperature,
the heater will turn on recurrently to maintain the set temperature only. This function allows much
lower energy consumption than calculations based on the heaters nominal heat output might indi-
cate. In the upperleft part of the control panel, there is a (TIMER) button which can be used to set
the automatic switch off time of the device. Every subsequent pressing of the buttons will light up
diodes on the heating time indicator and allow the user to preset the "switch off" time of the device
to between1 and 5 hours from the current time.
After this time, the heater will turn off automatically.
It is useful to know that::
— Longer pressing of the
function,
— The button can also be used when the heater is off. On pressing the button, the heater will
automatically turn on and set the TIMER to 1 hour,,
— If you want to turn the TIMER off, press the
and on,
— TIMER LED diodes will turn off one by one, to display the correct, remaining drying time.
14
TIMER button
TIMER indication
On / off button
button will automatically set the timer to 5 hours or, turn off the TIMER
PL
button several times or simply turn the heater off