Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Software Installations
N O TE
6
If you would like to use the U2500A Series DAQ devices with the Agilent
Measurement Manager application software, follow the step- by- step
instructions as shown in the following flowchart.
• If you do not wish to specifically use the device with the Agilent
Measurement Manager software but to use it on other ADE (e.g. Agilent VEE,
LabVIEW, MATLAB or Microsoft Visual Studio), you can skip steps D and F in
the following flowchart.
• You may require to install IVI-COM driver before using the U2500A Series with
other ADE.
D. Install the Agilent Measurement Manager
F. Launch Your Agilent Measurement Manager
A. Check Your System Requirements
B. Install the Agilent IO Libraries Suite
C. Install the Hardware Driver
E. Connect Your Device to the PC
U2500A Quick Start Guide
Werbung
Kapitel
Inhaltsverzeichnis
