Ghibli FRECCIA 15 Gebrauch Und Wartung Seite 36

EN
PROBLEM
No water comes out.
Insufficient floor cleaning.
CAUSE
Tank empty.
Solenoid valve enabling but-
ton not pressed.
Tap turned off.
Filter blocked.
Solenoid valve does not
work.
Unsuitable brushes or deter-
gent.
Brush worn.
BC version
A1 ....................................Printed circuit board
BAT ...................................... 2x 12V battery
U1 ...................................5A battery charger
Y1 .............................................Electrovalve
F1 ......................................... Main fuse 30A
M1 .........................................Vacuum motor
M2 .............................................Brush motor
P1........................................ ON/OFF switch
P2 ........................................... Brush button
P3 ..................................Vacuum interruptor
P4 ........................... Electrovalve interruptor
R1 ..............................Battery level indicator
CN1 ................................ Handle connector
CN2 .................... Battery charger connector
EN-14
SOLUTION
Fill the tank.
Press the button.
Turn on the tap located at the
bottom of the machine.
Clean the filter.
Call the technical support
service.
Use brushes or detergents
which are suitable for the
type of floor or dirt to be
cleaned.
Replace the brush.