Setup Steps - LaCie ethernet disk Schnellinstallationsanleitung

Setup Steps

1. Attaching the cables
• Connect the power cable.
• Connect the Ethernet cable.
2. Powering On
• Press the power button.
• Once the Ready Light turns on, you can start to configure your
LaCie Ethernet Disk.
Power Button
NOTE: Please allow approximately 3 minutes for the Ethernet Disk to start up and become available on the network.
READY H DISK
Ready Light
LaCie Ltd. XXXXXX
Serial Number XXXXXXXXX
LaCie Ltd. XXXXXX
Serial Number XXXXXXXXX