Installation In The Vehicle; Securing Infant Carrier In Your Vehicle - BHOOP MUHO BH0510 Benutzerhandbuch

Installation in the vehicle

4-1 Securing the infant carrier in your vehicle
To securing the infant carrier using the 3-point belt of your
vehicle proceed as follows:
Place the infant carrier rearward-facing on the vehicle seat (baby is facing
backwards).
Tip!
In certain cases it is possible that the infant carrier dose not rest securely
or is inclined too steeply on the vehicle seat.
This can be remedied by placing a blanket under the child seat or choosing
another seating position.
Ensure that the handle is in its upper position A.
Pull out the vehicle seat belt and place it across the infant carrier.
Engage the buckle tongue in the vehicle seat buckle.
Place the lap belt section in the blue belt guides on both sides of the infant
carrier.
Caution!
Do not twist the belt.
Tighten the lap belt section by pulling the diagonal belt section.
Caution!
The buckle of the vehicle seat belt must not be positioned in or
front of the blue shell (in the direction of travel).
Pull the diagonal seat belt section behind the top end of the infant carrier.
Push the diagonal belt section between the blue shell and the infant carrier
until the belt engages.
Caution!
Do not twist the belt.
16