Rear Panel; Connection; Important; Connecting A Toshiba Projector - Toshiba TLPC001 Benutzerhandbuch

Rear panel

(1) (2) (3) (4)
Name Function
(1) Security Lock : Attach a safety cable or any other antitheft
device
(2) DC IN 15V : Connect the power adapter into this port
(3) Flicker Switch : Set the suitable flicker setting to remove
wavering line (50/60Hz)
(4) Computer In : Input analog RGB signal from a computer
or other source
(5) Output : Output analog RGB signal from TLPC001
document camera or Computer in terminal
to Toshiba projector
(5)
13

Connection

♦ Important

•
Read the owner's manual of the device you are connecting to the
TLPC001 document camera.
•
Turn off the power of both devices before making the connection.
•
TLPC001 is designed for Toshiba's projectors or monitors only. This
is not intended to work with other brands. Otherwise, the unit may
not be able to display the image on the screen.
•
Make sure TLPC001 is placed on a flat stable surface.

Connecting a Toshiba projector

Please refer to the Owner's manual of Toshiba projector and check the
location of the RGB input terminal of the unit.

Connecting a computer

Connect TLPC001 to a PC, Macintosh, or other device with analog
•
RGB source such as laptop.
Turn on the computer then press INPUT button on TLPC001 control
•
panel or remote control to display the video signal from the computer.
IBM Compatible PC
Computer
Adapter
OR
(optional)
Macintosh
Plug to Display Card
To RGB Input
VGA Cable
(not supplied)
14