Opening The Tv Set - Loewe 70700 080 Einbauanweisung

Fig. 1, item no. (3)
Fig. 3, item no. (5)

2. Opening the TV set

Pull out the mains plug!
Remove the connecting leads from the TV set.
Remove the short connecting cable between the tuner connections if available.
Loosen and remove the screws marked by arrows in the appropriate sketch according to the TV set
model.
Take off the rear panel carefully after removing the screws.
Pull the appropriate rear panel cables out of the connectors on the chassis as applicable.
(Proceed in the reverse order to replace the rear panel.)
Screws to be loosened for the following TV sets:
Connect 32/ 37/ 42
14 screws size T20, page 35, fi g. 13.
The cover labelled "A" in fi g. 13 has been added in the course of product modifi cations.
The cover is held by magnetic force. Exception TV Connect 32, cover is held by snap-in lugs. If your set was produced before
the cover was used, this is not available.
Fig. 4, item no. (6)
13
Fig. 3, item no. (4)
Fig. 5, item no. (7a/7b)