ZOSI HD POE NVR Kurzanleitung Seite 9

4. Record Video
REC
Whether there including Hard Drive within NVR depends on the system sort you
select. This system works with most 3.5"SATA Hard Drive or 2.5" SATA Hard Drive.
1. Install a Hard Drive (If your system has preinstalled Hard Drive already, please skip
this step.)
(1).Unplug power supply from NVR. Unscrew, and remove the top cover.
(2).Connect the SATA power cable and data cable from DVR to the corresponding ports
of your Hard Drive (as shown).
(3).Put the Hard Drive into the NVR. Every cable should cross up over the Hard Drive.
(4).Keep Hard Drive and NVR together stable. Gently turn NVR over, and make every
hole in NVR alignment with hole in Hard Drive. Screw the screws attached into
corresponding holes with Phillips screwdriver. Assemble NVR's cover.
Note:
After installing a Hard Drive, you need first to format the Hard Drive before recording.
Right click the mouse > Go to Main Menu > Disk Management > Select the Hard Drive >
Click Format > Apply.
2. Record video
Right click mouse > Go to Main Menu > Setup > Record
You shall see the record settings for all channels. Change the record setting according
to your preference and apply the changes.
8