Optika TB-3W Bedienungsanleitung Seite 7

5. Plug one side of the cable named CAMERA
CONNECTION (USB + OTG) to the camera and
the other side to the Tablet PC.
6. Plug the cable named POWER SUPPLY
CONNECTION to the Tablet PC for battery
recharge.
Tablet has been set with the Rotation function disabled: this prevents any flipping of the Live View in order to
get a continuous and as large as possible view of your slide also when the Tablet is removed from the holder.
To enable this function again: activate the Rotation by swiping the screen on his bottom right side and selecting
Settings + Screen.
• Anyway, it's not suggested to activate the function when the camera is in Live View mode as it may give
troubles when the camera runs at high resolutions.
Page 7
Fig. 5