Installation - DJI OSMO PRO Bedienungsanleitung

Osmo Pro/RAW Wired Video Adapter can be used with the Osmo X5 Adapter and
Osmo Pro/RAW Z-Axis. It also comes with a DJI Focus communication port, which
allows the mobile device and DJI Focus or DJI Focus Handwheel to connect
simultaneously.
3
* DJI GO app Android version 3.1.5, Android system 4.4.0 or later and Osmo
Pro/RAW firmware v1.4.0.70 are required. Note that the Osmo Pro/RAW Wired
Video Adapter cannot be used with iOS devices due to the limitation of iOS.

Installation

The following instructions provide step by step directions on how to install the X5
Adapter.
1. Connect the communication port on the Osmo Pro/RAW Wired Video Adapter
to the communication port on the X5 adapter.
2. Connect the USB port on the Osmo Pro/RAW Wired Video Adapter to your
mobile device using a proper cable (not included, choose the proper cable
according to the mobile device's port).
3. Connect the DJI Focus communication port on the Osmo Pro/RAW Wired Video
Adapter to the DJI Focus Handwheel using the dedicated communication
cable (not included). Once the installation is complete, turn on the Osmo Pro/
RAW to start use.
1. Communication Port
2
2. USB Port
3. DJI Focus Communication Port
1
3