Installation - Fiamm SM21 Handbuch

INSTALLATION

POWER
To power the SM21 you can choose between two options:
- USB plug of your car.
- Direct 12/24V DC supply using an accessory cable (not included in the box). For
this option it is recommended a professional installation.
Then, connect the SM21 to the DC supply cable using the mini-USB connector
on the bottom of it.
ANTENNA
Use the SMB connector at the top of the SM21 to connect it with an antenna.
Please read carefully the instruction on the antenna's installation manual in order
to install it properly.
The positioning and the mounting accuracy of the antenna is fundamental for
a good reception performance. If you have any doubts please contact a local
installer.
Antenna
EN
SMB Connector
DC Supply
Mini-USB Connector
11