Charging Your Device - Eton boost solar Bedienungsanleitung

BOOSTSOLAR USER MANUAL

CHARGING YOUR DEVICE

The USB output of the BoostSolar and the Battery Pack are each rated
at 5V/2A. Simply plug your device's USB cable into the USB Out of the
BoostSolar or the USB Out of the Battery Pack (using the included Micro
USB to standard USB adapter provided). The LED light(s) will turn on and
power will begin to transfer to your device. LEDs will indicate the remaining
charge in the battery pack.
Note: Charging current can be affected by temperature so in extremely hot
conditions the output current may be reduced.
7