Top Panel; Rear Panel; Operation - ION Garage Rocker Kurzanleitung

9. Master Volume Control: This adjusts the speaker's main mix volume, which includes the
Microphone Input, Auxiliary Input, Radio, and the audio of a paired Bluetooth device.
10. Microphone Input with Volume Control (1/4"): This mono input accepts a 1/4" (6.35 mm) input
such as a microphone, guitar, or other musical instrument.
11. Auxiliary Input: This stereo 1/8" (3.5 mm) input can be used to connect a CD player, MP3
player, or other audio source.
12. USB Charging Port: Connect your device's charge cable here to charge it. USB charging only
functions when the unit's power is turned on.
Note: To charge smartphones and tablets faster, put the device's screen to sleep.

Top Panel

1. NFC: Tap your NFC (near-field communication) supported and enabled
device here to pair your phone by gently bumping on the 'N' logo.
2. Mechanical Features
bits/screws/parts, imperial and metric rulers, a protractor, and a socket tray.

Rear Panel

1. Power Cable Input: Insert the included power cable here to charge
the unit. Note that the Garage Rocker can be used with the power
cable while it simultaneously charges the battery.
Side Panel (not shown)
1. Magnetic Strip: Use this strip for holding tools.

Operation

Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Garage Rocker. If you have previously connected to another Bluetooth device, Garage
Rocker will reconnect. To disconnect pairing if the Bluetooth icon is lit solid, press and release
the Bluetooth button.
3. Navigate to your Bluetooth device's setup screen, find "Garage Rocker" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
4. To disconnect pairing while the Bluetooth icon is lit solid, press and release the Bluetooth
button.
5. To connect to another Bluetooth device, repeat step 3.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.
6
(not shown): Use this panel to hold
1
drill
1