Azuri AZTWMINI2 Anleitung

Instructions for use of a single earphone
Press the headset button for about 5 seconds to enter pairing mode (the earphone indicator light will
have red and blue lights flashing). At this point search for "Azuri" with your Bluetooth device and tap
to connect your device to the earphone. If you need to insert a password, insert ''0000'' and press
''Yes''.
After the pairing is successful, the indicator light automatically turns off. Once connected to your
Bluetooth device you can enjoy your music or hands-free phone calls.
Dual earphone instructions
1. Press the earphone button on both earphones for about 5 seconds to enter pairing mode (the
earphone indicator light will have red and blue lights flashing). Put the two earphones close and wait
for 3 seconds. The earphones will automatically connect with each other.
2. Once the two earphones are connected, only one earphone will be in pairing mode (red and blue
lights flashing). At this point search for Azuri with your Bluetooth device and tap to connect your
device to the earphones. If you need to insert a password, insert ''0000'' and press ''Yes''.
After pairing is successful, the indicator light automatically will turn off. Once connected to your
Bluetooth device you can enjoy your music or hands-free phone calls.
Instructions if dual earphones do not connect
If you are experiencing issues with pairing please follow these steps (soft reset):
1. Clear pairing name of earphones (Azuri) in your smartphone. Make sure both earphones are cleared
from your records. (as some devices can connect to multiple Bluetooth devices)
2. Turn off Bluetooth on your smartphone.
3. Make sure both headsets are turned off
3. Long press the power on button of both earphones until they reach pairing mode (flashing red and
blue lights). Then put the couple of earphones closely, once they pair one earphone will flash red and
blue lights, the other will turn off.
4. At this point search for Azuri with your Bluetooth device and tap to connect your device to the
earphones. If you need to insert a password, insert ''0000'' and press ''Yes''.
If you are still experiencing issues with pairing please follow these steps (hard reset):
1. Make sure both earphones are powered off
2. Press and hold the power on button. The earphones will go through pairing mode (flashing red and
blue lights), then power themselves off. Once powered off, release the power on button. Power the
earphones on again, this time NOT in until pairing mode. This will allow the earphones to connect to
each other.
3. Once the earphones are connected, one will be entering in pairing mode and await connecting with
your smartphone.