Inhaltsverzeichnis
Werbung
Quick Start Guide
Prestigio Smart Body Fat Scale
pair-up is proceeding.
2. Press and hold "UNIT" button in the back of the scale to start
pair-up.
• Symbol
and symbol
alternatively, indicating pair-up is proceeding.
• If SUCCEED, symbol
• If FAIL, symbol "E1" will be shown on the LCD.
Measurement
5. Taking Measurements on a Carpet
For using Prestigio Smart Body Fat Scale, please add the carpet
feet as demonstrated in the following page:
1. Remove the non-slip pads from the scales feet .
2. Fit the carpet feet firmly onto the scale's feet.
Note: For the first removal of non-slip pads, you may need to
use the assistance of a knife to make a small cut between the
edge of the scale feet and the non-slip pad.
6. Select Measurement Unit
With batteries correctly installed, press "UNIT" button in the
back of the scale to select measurement unit. The default
measurement unit is "kilogram". You may press "UNIT" button
to choose among kilogram, stone and pound.
7. Daily Measurement
1. With original SENSE ON patent technology, the scale will
automatically switch on as you step on the
platform barefooted.
2. Stand still and keep full contact with the
electrodes until the LCD stops displaying
moving "o".
3. When your scale is successfully paired with
your mobile device and the Bluetooth is ON,
it will process data transmission automatically.
will be shown on the LCD
will be shown on the LCD.
Werbung
Inhaltsverzeichnis
