Setting Up Your Phone - NUU Mobile S6001L Erste Schritte

Setting Up Your Phone

Follow these step-by-step instructions to set up your G2.
Power off the phone before inserting any cards!
EN
1 Remove SIM Tray
• Remove the SIM tray by inserting a pin eject key/
paper clip in the small circular hole at the bottom of
the tray. The tray will then eject from the phone.
2 Configuration 1: Dual SIM Standby
• Orient SIM card to match layout on tray.
• SIM 1 (Nano) supports 4GLTE connections.
• SIM 2 (Nano) supports 4GLTE connections.
3 Configuration 2: microSD™ Card/SIM
• Orient microSD/SIM card to match layout on tray.
• microSD card supports up to 64GB
• SIM 2 (Nano) supports 4GLTE connections.
4 Replace SIM Tray
• After placing the SIMs and/or memory card in the
tray, slide it back into its slot. It will click and hold
in place.
5 Charge/Sync
• Plug in the type C connector to charge the phone or
transfer data.
Warning:
SIM cards are small enough to become a choking hazard, so
please keep them away from Children & Pets. SIM cards are also
quite delicate. Please be careful when handling your card.
4