Seite 1
English 60 GHz Wireless HD Transceiver MWIHD1 User's Guide Introduction Package contents The following items should be included: • Transmitter unit (MWIT1) • Receiver unit (MWIR1) • HDMI ® cable • User's Guide • Warranty • Power adapter • MHL cable If any of the above items is damaged or missing, please contact your supplier immediately.
Seite 2
English Hardware 60 GHz Wireless HD MWIR1 / MWIT1 Front panel LED indicator Color Behavior Indication The transmitter has Blinking started transmitting and slowly has not yet found the receiver. Transmitter and receiver Blinking are linked and fast communicating with each other.
English Rear panel HDMI/MHL DC-in Find next Power switch Configuration Short press (< 10 seconds) to detect the next source. This function allows you to switch the source of the audio/video to another in-range Wireless HD transmitter. This disconnects the current connection Find next and triggers a connection to the next available source on the device list.
Seite 4
English Step 1 The transmitter (MWIT1) Step 2 The receiver (MWIR1) Notes For the best results, the MWIT1 and MWIR1 should: Face each other and be in the same room. Be no more than 33 feet (10 meters) apart. MWIT1 should not be placed in a cabinet or on a closed shelf.
Seite 5
English 3. Check that the transmitter is powered. 4. Turn on the transmitter. Select the source Connecting to a different transmitter 1. Turn on the new transmitter. Power switch 2. Press the Find next button for 2 seconds. Find next button 3.
English Specifications Specifications Standards Wireless HD 1.1, HDMI 1.4a, MHL V2.0 Frequency 60 GHz HDMI/MHL -n (MWIT1), Input/output MHL out x 1 (MWIR1) Antenna type 24 antenna array Range 10 meters in-room usage MWIT1: 1 port (CEC pass through) A/V port MWIR1: 1 port (CEC pass through) Weight: 106 g (MWIT1)
Seite 7
English Video formats Vertical Color Video format Sampling Supported refresh space 4:2:2 YCbCr 480i 59.94 Hz 4:4:4 (1440 x 480i) 4:4:4 4:2:2 480p/480pw YCbCr 59.94 / (640 x 480p/ 4:4:4 60 Hz 720 x 480p) 4:4:4 4:2:2 YCbCr 576i 50 Hz 4:4:4 (1440 x 576i) 4:4:4...
Seite 8
English 4:2:2 YCbCr 23.976 / 4:4:4 24 Hz 4:4:4 4:2:2 YCbCr 1080p 50 Hz 4:4:4 (1920 x 1080p) 4:4:4 4:2:2 YCbCr 59.94 / 4:4:4 60 Hz 4:4:4 59.94 Hz 4:4:4 (640 x 480) SVGA 60 Hz 4:4:4 (800 x 600) 60 Hz 4:4:4 (1024 x 768)
Seite 9
English Audio formats Audio sample rate LPCM LPCM 2/6/8-channel 2-channel 44.1 88.2 176.4 Supported Supported *Specification subject to change without notice. FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Seite 10
English FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired...
Seite 11
Français Émetteur-récepteur HD sans fil 60 GHz Guide d’utilisation du MWIHD1 Introduction Contenu de l’emballage Les éléments suivants doivent être inclus : • Émetteur (MWIT1) • Récepteur (MWIR1) ® • Câble HDMI • Guide d’utilisation • Garantie • Adaptateur secteur •...
Seite 12
Français Matériel MWIR1 / MWIT1HD sans fil 60 GHz Panneau avant Témoin à diode Diode Couleur Comportement Indication L’émetteur a commencé à Clignote transmettre et n’a lentement pas encore trouvé le récepteur. L’émetteur et le Clignote récepteur sont liés rapidement et communiquent Alimenta entre eux.
Seite 13
Français Panneau arrière HDMI/MHL Entrée Trouver Interrupteur suivant d’alimentation Configuration Appui court (< 10 secondes) pour détecter la source suivante. Cette fonction vous permet de basculer la source de l’audio/vidéo vers un autre émetteur sans fil HD à portée. Ceci interrompt la connexion en cours et Trouver déclenche une connexion à...
Seite 14
Français 2. Connectez le récepteur au port HDMI/MHL sur le projecteur. Sélectionnez WirelessHD dans la liste des sources de projecteurs. Étape 1 L’émetteur (MWIT1) Étape 2 Le receveur (MWIR1) Remarques Pour obtenir les meilleurs résultats, le MWIT1 et le MWIR1 devrait : Être en face l’un de l’autre et être dans la même pièce.
Français 3. Vérifiez que l’émetteur est alimenté. 4. Allumez l’émetteur. Sélectionner la source Se connecter à un émetteur différent 1. Allumez le nouvel émetteur. Interrupteur d’alimentation 2. Appuyez le bouton Trouver suivant pendant 2 secondes. Bouton Trouver suivant 3. La diode sur l’émetteur commencera à clignoter rapidement.
Français Caractéristiques Caractéristiques Standards Sans fil HD 1.1, HDMI 1.4a, MHL V2.0 Fréquence 60 GHz HDMI/MHL -n (MWIT1), Entrée/Sortie Sortie MHL x 1 (MWIR1) Type d’antenne Groupe de 24 antennes Plage 10 mètres en utilisation en intérieur MWIT1 : 1 port (relais CEC) Port A/V MWIR1 : 1 port (relais CEC) Poids :...
Seite 17
Français Formats vidéo Rafraîchi Espace Échantil Pris en Format vidéo ssement couleur lonnage charge vertical 4:2:2 YCbCr 480i 59,94 Hz 4:4:4 (1440 x 480i) 4:4:4 4:2:2 480p/480pw YCbCr 59,94 / 60 (640 x 480p/ 4:4:4 720 x 480p) 4:4:4 4:2:2 YCbCr 576i 50 Hz...
Seite 18
Français 4:2:2 YCbCr 23,976 / 4:4:4 24 Hz 4:4:4 4:2:2 YCbCr 1080p 50 Hz 4:4:4 (1920 x 1080p) 4:4:4 4:2:2 YCbCr 59,94 / 60 4:4:4 4:4:4 59,94 Hz 4:4:4 (640 x 480) SVGA 60 Hz 4:4:4 (800 x 600) 60 Hz 4:4:4 (1024 x 768) WXGA...
Seite 19
Français Formats audio Taux d’échantillonnage audio LPCM 2 LPCM 2/6/8 canaux canaux 44,1 88,2 176,4 Pris en charge Pris en charge *Les caractéristiques peuvent être modifiées sans préavis. FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Seite 20
Français FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired...
Seite 21
Deutsch 60 GHz WLAN HD Transceiver MWIHD1 Bedienungsanleitung Einleitung Packungsinhalt Die folgenden Artikel sollten enthalten sein: • Sendeeinheit (MWIT1) • Empfangseinheit (MWIR1) • HDMI ® Kabel • Bedienungsanleitung • Garantie • Netzteil • MHL-Kabel Wenn einer der oben genannten Artikel beschädigt oder nicht vorhanden ist, kontaktieren Sie bitte umgehend Ihren Händler.
Seite 22
Deutsch Hardware 60 GHz WLAN HD MWIR1 / MWIT1 Vorderseite LED-Anzeige Farbe Verhalten Anzeige Der Sender hat mit dem Blinkt Senden begonnen und langsam dem Empfänger noch nicht gefunden. Sender und Empfänger sind miteinander Blinkt verbunden und schnell kommunizieren miteinander. Ein/Aus Blau MWIR1 und MWIT1...
Seite 23
Deutsch Rückseite HDMI/MHL Nächste Ein/Aus- Eingang finden Schalter Konfiguration Langsam drücken (< 10 Sekunden), um die nächste Quelle zu suchen. Mit dieser Funktion können die Audio/Video-Quelle auf einen WLAN HD Sender in Reichweite wechseln. Dies trennt die aktuelle Verbindung und startet eine Verbindung mit der Nächste finden nächsten verfügbaren Quelle in der...
Seite 24
Deutsch Ausgangsauflösung des Computers der eines unterstützten Videoformats entspricht. 2. Verbinden Sie den Empfänger mit dem HDMI/MHL-Anschluss am Projektor. Wählen Wire- lessHD aus der Quellliste des Projektors. Schritt 1 Der Sender (MWIT1) Schritt 2 Der Empfänger (MWIR1) Notizen Für optimale Ergebnisse sollten der MWIT1 und MWIR1: Sich gegenüberstehen und im selben Raum sein.
Deutsch 3. Prüfen Sie, dass der Sender eingeschaltet ist. 4. Schalten Sie den Sender ein. Auswahl der Quelle Verbindung mit einem anderen Sender 1. Schalten Sie den neuen Sender ein. Ein/Aus-Schalter 2. Drücken Sie 2 Sekunden lang auf Nächste finden. Nächste finden Taste 3.
Deutsch Technische Daten Technische Daten Standards WLAN HD 1.1, HDMI 1.4a, MHL V2.0 Frequenz 60 GHz HDMI/MHL -n (MWIT1), Eingang/Ausgang MHL Ausgang x 1 (MWIR1) Antennentyp 24 Antennenanordnung Bereich 10 Meter Nutzung innen MWIT1: 1 Anschluss (CEC Passthrough) A/V-Anschluss MWIR1: 1 Anschluss (CEC Passthrough) Gewicht: 106 g (MWIT1)
Seite 27
Deutsch Videoformate Vertikale Videoformat Aktualisie Farbraum Abtastung Unterstützt rung 4:2:2 YCbCr 480i 59,94 Hz 4:4:4 (1440 x 480i) 4:4:4 4:2:2 480p/480pw YCbCr 59,94 / (640 x 480p/ 4:4:4 60 Hz 720 x 480p) 4:4:4 4:2:2 YCbCr 576i 50 Hz 4:4:4 (1440 x 576i) 4:4:4 YCbCr...
Seite 28
Deutsch 4:2:2 YCbCr 23,976 / 4:4:4 24 Hz 4:4:4 4:2:2 YCbCr 1080p 50 Hz 4:4:4 (1920 x 1080p) 4:4:4 4:2:2 YCbCr 59,94 / 4:4:4 60 Hz 4:4:4 59,94 Hz 4:4:4 (640 x 480) SVGA 60 Hz 4:4:4 (800 x 600) 60 Hz 4:4:4 (1024 x 768)
Seite 29
Deutsch Audioformate Audio Abtastrate LPCM LPCM 2/6/8-Kanal 2-Kanal 44,1 88,2 176,4 Unterstützt Unterstützt *Die technischen Daten des Produktes können ohne Ankündigung geändert werden. FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Seite 30
Deutsch FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Oper- ation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Seite 31
Italiano Ricetrasmettitore HD wireless da 60 GHz Guida per l’utente di MWIHD1 Introduzione Contenuto della confezione Devono essere presenti i seguenti articoli: • Unità del trasmettitore (MWIT1) • Unità del ricevitore (MWIR1) ® • Cavo HDMI • Guida per l’utente •...
Seite 32
Italiano Hardware 60 GHz Wireless HD MWIR1 / MWIT1 Pannello anteriore Indicatore LED Comporta Colore Indicazione mento Il trasmettitore ha Lampeggio iniziato la trasmissione lento e non ha ancora trovato il ricevitore. Il trasmettitore e il Lampeggio ricevitore sono collegati rapido e comunicanti tra loro.
Italiano Pannello posteriore HDMI/MHL Ingresso Trova Interruttore successiva alimentazione Configurazione Premere brevemente (< 10 secondi) per rilevare la sorgente successiva. Questa funzione consente di commutare la sorgente audio/video a un altro trasmettitore Wireless HD all'interno del raggio. Questo disconnette la Trova connessione corrente ed attiva una successiva...
Seite 34
Italiano 2. Collegare il ricevitore alla porta HDMI/MHL del proiettore. Selezionare WirelessHD dall'elenco delle sorgenti del proiettore. Passo 1 Il trasmettitore (MWIT1) Passo 2 Il ricevitore (MWIR1) Note Per ottenere risultati ottimali, il MWIT1 e il MWIR1 devono: essere uno di fronte all'altro e trovarsi nella stessa stanza.
Italiano 3. Verificare che il trasmettitore sia alimentato. 4. Accendere il trasmettitore. Selezione della sorgente Collegamento a un trasmettitore diverso 1. Accendere il nuovo trasmettitore. Interruttore alimentazione 2. Premere il pulsante Trova successiva per 2 secondi. Trova il pulsante Avanti 3.
Seite 36
Italiano Specifiche Specifiche Standard Wireless HD 1.1, HDMI 1.4a, MHL V2.0 Frequenza 60 GHz HDMI/MHL -n (MWIT1), Ingresso/uscita Uscita MHL x 1 (MWIR1) Tipo di Gruppo di 24 antenne antenna Intervallo 10 metri utilizzo nella stanza MWIT1: 1 porta (CEC pass through) Porta A/V MWIR1: 1 porta (CEC pass through) Peso:...
Seite 37
Italiano Formati video Aggiorna Spazio Campiona Suppor Formato video mento colore mento tato verticale 4:2:2 Sì YCbCr 480i 59,94 Hz 4:4:4 Sì (1440 x 480i) 4:4:4 Sì 4:2:2 Sì 480p/480pw YCbCr 59,94 / 60 (640 x 480p/ 4:4:4 Sì 720 x 480p) 4:4:4 Sì...
Seite 38
Italiano 4:2:2 Sì YCbCr 23,976 / 4:4:4 Sì 24 Hz 4:4:4 Sì 4:2:2 Sì YCbCr 1080p 50 Hz 4:4:4 Sì (1920 x 1080p) 4:4:4 Sì 4:2:2 Sì YCbCr 59,94 / 60 4:4:4 Sì 4:4:4 Sì 59,94 Hz 4:4:4 Sì (640 x 480) SVGA 60 Hz 4:4:4...
Seite 39
Italiano Formati audio Frequenza di campionamento audio LPCM 2/6/8 canali LPCM 2 canali 44,1 88,2 176,4 Supportato Supportato *Le specifiche possono essere soggette a cambiamenti senza preavviso. FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Seite 40
Italiano FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired...
Seite 41
Español Transceptor HD inalámbrico 60 GHz Manual de usuario del MWIHD1 Introducción Contenido de la caja La caja debería incluir los siguientes artículos: • Unidad transmisora (MWIT1) • Unidad receptora (MWIR1) ® • Cable HDMI • Manual de usuario • Garantía •...
Seite 42
Español Hardware MWIR1/MWIT1 inalámbrico HD 60 GHz Panel frontal Indicador LED Comporta Color Indicación miento El transmisor ha iniciado Parpadeo la transmisión pero aún lento no ha encontrado el receptor. El transmisor y el Parpadeo receptor están rápido vinculados y se están comunicando entre sí.
Español Panel trasero HDMI/MHL Entrada Buscar Interruptor de de CC siguiente encendido Configuración Pulsar brevemente (< 10 segundos) para detectar la siguiente fuente. Esta función le permite conmutar la fuente de audio/vídeo a otro transmisor HD inalámbrico que se encuentre dentro del alcance.
Seite 44
Español formato de vídeo compatible. 2. Conecte el receptor al puerto HDMI/MHL del proyector. Seleccione WirelessHD en la lista de fuentes del proyector. Paso 1 El transmisor (MWIT1) Paso 2 El receptor (MWIR1) Notas Para lograr los mejores resultados posibles el MWIT1 y el MWIR1 deben: Estar orientados uno hacia el otro y encontrarse en la misma sala.
Español 3. Asegúrese de que el transmisor se encuentra encendido. 4. Encienda el transmisor. Seleccione la fuente Conexión a un transmisor distinto 1. Encienda el nuevo transmisor. Interruptor de encendido 2. Pulse el botón Buscar siguiente durante 2 segundos. Botón Buscar siguiente 3.
Español Especificaciones Especificaciones HD inalámbrico 1.1, HDMI 1.4a, MHL Estándares V2.0 Frecuencia 60 GHz HDMI/MHL -n (MWIT1), Entrada/salida 1 salida MHL (MWIR1) Tipo de antena Matriz de 24 antenas Alcance Uso de 10 metros en salas MWIT1: 1 puerto (pasarela CEC) Puerto de A/V MWIR1: 1 puerto (pasarela CEC) Peso:...
Seite 47
Español Formatos de vídeo Actualiza Formato de Espacio Compati ción Muestreo vídeo de color vertical 4:2:2 SÍ YCbCr 480i 59,94 Hz 4:4:4 SÍ (1440 × 480i) 4:4:4 SÍ 480p/480pw 4:2:2 SÍ YCbCr (640 × 59,94/60 4:4:4 SÍ 480p/720 × 4:4:4 SÍ...
Seite 48
Español 4:2:2 SÍ YCbCr 23,976/ 4:4:4 SÍ 24 Hz 4:4:4 SÍ 4:2:2 SÍ YCbCr 1080p 50 Hz 4:4:4 SÍ (1920 × 1080p) 4:4:4 SÍ 4:2:2 SÍ YCbCr 59,94/60 4:4:4 SÍ 4:4:4 SÍ 59,94 Hz 4:4:4 SÍ (640 × 480) SVGA 60 Hz 4:4:4 SÍ...
Seite 49
Español Formato de audio Tasa de muestreo de audio LPCM 2 LPCM 2/6/8 canales canales 44,1 88,2 176,4 Compatible Compatible *Las especificaciones están sujetas a cambios sin previo aviso. FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Seite 50
Español FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired...
Seite 51
Português Transceptor HD 60 GHz Sem fios Manual do Utilizador do MWIHD1 Introdução Conteúdo da embalagem Devem estar incluídos os seguintes itens: • Unidade Transmissora (MWIT1) • Unidade Receptora (MWIR1) ® • Cabo HDMI • Manual do Utilizador • Garantia •...
Seite 52
Português Hardware 60 GHz HD Sem Fios MWIR1 / MWIT1 Painel frontal Indicador LED Comportamento Indicação O transmissor iniciou a transmissão e Piscar lento ainda não localizou ou receptor. O transmissor e receptor estão Piscar rápido conectados e a comunicar entre si. Alimen Azul tação...
Seite 53
Português Painel traseiro HDMI/MHL Entrada Encontrar Interruptor de seguinte alimentação Configuração Pressionar curto (< 10 segundos) para detectar a fonte seguinte. Esta função permite-lhe mudar a fonte áudio/vídeo para outro transmissor Sem Fios HD ao alcance. Isto desliga a ligação actual e Encontrar activa uma ligação à...
Seite 54
Português Passo 1 O transmissor (MWIT1) Passo 2 O receptor (MWIR1) Notas Para os melhores resultados, o MWIT1 e MWIR1 devem: Estar frente a frente e na mesma divisão. Estar a menos de 33 pés (10 metros) de distância um do outro.
Seite 55
Português 3. Verifique se o transmissor está ligado. 4. Ligue o transmissor. Seleccione a fonte Ligar a um transmissor diferente 1. Ligue o novo transmissor. Interruptor de alimentação 2. Prima o botão Encontrar seguinte durante 2 segundos. Botão Encontrar seguinte 3.
Seite 56
Português Especificações Especificações Normas Wireless HD 1.1, HDMI 1.4a, MHL V2.0 Frequência 60 GHz HDMI/MHL -n (MWIT1), Entrada/saída saída MHL x 1 (MWIR1) Tipo de antena Conjunto de 24 antenas 10 metros, em utilização dentro de uma Alcance divisão MWIT1: 1 porta (passagem CEC) Porta A/V MWIR1: 1 porta (passagem CEC) Peso:...
Seite 57
Português Formatos vídeo Actuali Gama Amostra Formato vídeo zação Suportado de cor vertical 4:2:2 YCbCr 480i 59,94 Hz 4:4:4 (1440 x 480i) 4:4:4 4:2:2 480p/480pw YCbCr 59,94 / (640 x 480p/ 4:4:4 60 Hz 720 x 480p) 4:4:4 4:2:2 YCbCr 576i 50 Hz 4:4:4...
Seite 58
Português 4:2:2 YCbCr 23,976 / 4:4:4 24 Hz 4:4:4 4:2:2 YCbCr 1080p 50 Hz 4:4:4 (1920 x 1080p) 4:4:4 4:2:2 YCbCr 59,94 / 4:4:4 60 Hz 4:4:4 59,94 Hz 4:4:4 (640 x 480) SVGA 60 Hz 4:4:4 (800 x 600) 60 Hz 4:4:4 (1024 x 768)
Seite 59
Português Formatos áudio Taxa de amostragem áudio LPCM LPCM 2/6/8-canais 2-canais 44,1 88,2 176,4 Suportado Suportado *As especificações estão sujeitas a alteração sem aviso prévio. FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Seite 60
Português FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired...
Seite 69
繁體中文 音訊格式 音訊取樣率 LPCM 2/6/8 頻道 LPCM 2 頻道 44.1 88.2 176.4 支援 支援 *規格如有變更,恕不另行通知。 FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Seite 70
繁體中文 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired...
Seite 79
简体中文 音频格式 音频采样率 LPCM 2/6/8-通道 LPCM 2-通道 44.1 88.2 176.4 支持 支持 *规格如有更改,恕不另行通知。 FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Seite 80
简体中文 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired...
Seite 81
IC Statement: This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.