Von Racer 9015-2 Montageanleitung Seite 8

ASSEMBLY INSTRUCTION
STEP 7: Attach the arms to the seat cushion with four M8X45mm bolts,
using the Wrench.
Note: Arm rests are labeled with an "L"(left) or "R"(right) to show which
8
STEP 8: Lay the back cushion on the seat of the chair with the top of the
cushion toward the front.
Attach the back cushion to the arms by inserting two M8x45mm bolts in
the hole with the wrench .
Note: Do not tighten the bolts fully.
8
service@vonracer.net
sides they should be placed on.
4
4
www.vonracer.net
.0 3
D
D
8