Marmitek 09048 Handbuch Seite 3

Button Descriptions:
Indicator light (LED):
The indicator light flashes when the remote is operating.
[1] Set-up:
Used for entering code numbers matching your TV, VCR or other
equipment.
[2] Power:
Works in the same way as your original remote. Also used to switch
all Marmitek X-10 Lamp Modules on.
[3] TV, VCR, SAT:
Used to select the device to control.
[4] Marmitek X-10 button:
Lets you control Marmitek X-10 Home Automation Modules to
operate lamps and appliances around your home.
0 .. 9:
Used as your original remote and to enter device codes.
[5] A · B:
Used for toggle functions (pre-programmed mode).
[6] Ent (Enter):
Used in conjunction with the numeric keys for direct channel tuning.
In set-up mode used to confirm.
[7] Info:
Works in the same way as your original remote.
[8] Channel:
Works like your original remote. Also used to switch Marmitek X-10
Home Automation Modules on and off.
[9] Mute:
Works the same way as your original remote. Also used to switch all
Marmitek X-10 Home Automation Modules off.
[10] Volume:
Works like your original remote. Also used to brighten and dim
lamps connected to Marmitek X-10 Lamp Modules.
[11] Fast text MIX:
Mixes the text with the TV program on the background.
[12] Fast text HOLD:
Holds the current page.
[13] Play, FF, Stop, Rew, Pause:
Works the same as on your original remote. Also function as fast
text colour keys.
[14] Fast text OFF.
[15] Fast text ON.
[16] REC:
Record button. Works the same as your original VCR remote. You
must press the REC button twice to begin recording .
2