Add Camera - TE-Group mrSafe APPLE Handbuch

Fill in a new password for logging into your IP camera. You can choose for view only or view and
operate with the new password. This means that when you choose for view only that when you log in
with the new password you can only view de footage of the camera. If you choose view and operate,
you can view and also change the settings of the camera.
Another way to change the password is going back to the "WAN" list and press "Options" in the right
upper corner. Press "Change Password" and fill in the new password. If you want to delete the
password you have chosen and you want to use the additional password, reset the camera by
pressing the reset button on the bottom of the IP camera.

5.3.1.4. Add camera

Go to the "WAN" list and select "Options" in the upper right corner. Press "Add camera".
21