Safety Instructions; Parts Description; Before The First Use - Kiwi khb 4420 Bedienungsanleitung

SAFETY INSTRUCTIONS

• By ignoring the safety instructions the manufacturer can not be hold responsible for the
damage. • Do not use this appliance with a damaged cord or plug or when the appliance
has malfunctions, or has been damaged in any manner. To avoid a hazard make sure that
a damaged cord or plug will be replaced by an Competent qualified repair service(*). Do not
repair this appliance yourself. • Never move the appliance by pulling the cord and make sure
the cord can not become entangled. • The appliance must be placed on a stable, level surface.
• The user must not leave the device unattended while it is connected to the supply. • This
appliance is only to be used for household purposes and only for the purpose it is made for.
• To protect children against the dangers of electrical appliances, please make sure that you
never leave the appliance unattended. Therefore you have to select a storage place for the
appliance where children are not able to grab it. Make sure that the cable is not hanging in a
downward position. • To protect yourself against an electric shock, do not immerse the cord,
plug or appliance in the water or any other liquid. • Switch off the appliance and disconnect
from supply before changing accessories or approaching parts that move in use. • NOTE: The
chopping blades are very sharp, avoid physical contact during emptying and cleaning the
device, you can seriously injure. • Always disconnect the device from the supply if it is left
unattended and before assembling, disassembling or cleaning. • Do not allow children to use
the device without supervision. * Competent qualified repair service: after sales department of
the producer or importer or any person who is qualified, approved and competent to perform
this kind of repairs in order to avoid all danger. In any case you should return the appliance to
this repair service.

PARTS DESCRIPTION

1. Turbo speed button
2. Normal speed button
3. Whisk
4. Whisk base
5. S/S Stick
6. Lid
7. Bowl
8. Blades

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers, protective foil or
plastic from the device. • Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products. • Put the power cable into the socket.
(Note: Make sure the voltage which is indicated on the device matches the local voltage before
connecting the device. Voltage 220V-240V 50/60Hz 500W) • Never use the mixer for longer
than 1 minute continuously, after this allow the mixer to cool down for 5 minutes. • The blades
of the slicing and chopping disk and the blade chopping are very sharp, avoid physical contact,
you can seriously injure.
USE
Using the blender
The hand blender is intended for:
1
2
5
4
2
3
6
7
8