NGS electonics SPARK V2 Bedienungsanleitung Seite 7

ENGLISH
INSTRUCTIONS ON HOW TO USE YOUR FM TRANSMITTER
1. Insert this FM transmitter into your vehicle's cigarette lighter or power port.
2. Tune to your radio to a desired FM frequency, then match that same frequency on to the FM transmitter by using
the buttons on the unit or on the remote control.
3. Plug your compatible SD card (Max 16 Gb, not included) into the SD port or USB flash drive (Max 16 Gb, not
included) into the USB port of your FM transmitter, or connect your other compatible devices using the audio
cable (included).
4. For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from
the other device's "Line out" to the FM transmitter "Line in". When using an external device, all functions will be
controlled by the external device, neither the transmitter nor its remote control.
Remarks: When you using this function, please press "
have plugged SD or USB into this transmitter already.
For any troubleshooting please contact
support@ngs.eu
" to stop playing the music from USB or SD card if you
HEREBY, LURBE GRUP S.A., DECLARES
THAT THIS FM TRANSMITTER IS IN
COMPLIANCE WITH THE ESSENTIAL
REQUIREMENTS AND OTHER
RELEVANT PROVISIONS OF DIRECTIVE
1999/5/EC.
7