Bluetooth Headset Manual - Madison Candy Tech CT-03 Bedienungsanleitung

Bluetooth Headset Manual

Charging the Battery
Battery must be fully charged prior to first use!
a. Connect the charger cable to the headset's charging socket
b. Plug the charger into a wall (AC) outlet
c. At first the indicator light will be red. When the battery is
fully charged, the light turns off
d. Disconnect the charger from the headset and the wall outlet
Switching the Headset Power On and Off
a. Connect the earphones to the Bluetooth unit.
b. To turn power on: Hold down the start/end button
and push up. Blue lights turn on.
c. To turn power off: Hold down the start/end button and push
down. A red light will flash until the headset is turned off.
Pairing the Headset with a Bluetooth-Enabled Phone
a. Turn on the headset in standby mode
b. Set the phone to search for Bluetooth device
c. When phone finds the headset, confirm by selecting the
headset (HM3500) from list
d. Enter pass code 0000 when prompted by phone
e. Repeat steps if the pairing is unsuccessful. You only need
to pair once.
f. When the pairing is successful, it starts to flash blue,
indicating that is in standby mode and is ready to
make/receive calls
GB-19
Answering a Call / Ending a Call
a. Press the answer/end key on your phone, or
b. Quickly press the answer/end key on the headset
Declining a Call
a. Press the end key on your phone, or
b. Press and hold the answer/end key for about 1 second
when phone is ringing
Making a Call
a. Use your phone to dial the number, then press the
answer/call key on your phone to automatically transfer the
call to the headset
Redialling the Last Called Number
a. Single press the answer/end key twice (2 short presses)
when the headset is in standby mode
Adjusting the Volume of the Headset
a. Hold down the headset volume keys to adjust volume
Storing the Headset
a. Power off the headset
b. Keep within a temperature range of -10°C/14°F to 60°C/134°F
c. Do not expose the headset to rain or any other liquids
GB
GB-20