Product Maintenance - Pyramida N60 Betriebsanleitung

While application of the extractor fan, for the purpose of
maximum capacity and efficiency of its work, it is necessary
to periodically take preventive measures and maintain the
extractor fan.
While
maintenance measures, cut the fan off
the power network!
While preventive maintenance, regularly carry out the
following actions:
In the extractor fan lighting lamps of type Е14 are used,
their power is not more that 40 W. Replacement of lamps is
made in the following order:
- Make sure that cooking hood is disconnected from power
network before lamps replacement; wait until lamps will
cool down.
taking preventive and
E14 40В

PRODUCT MAINTENANCE

- Regularly remove all food remains and fat from the lower
panel of the fan and aluminum fat filters. Excessive fat
contamination may become a result of inflammation!
- Wipe external surfaces of the fan with wet, well squeezed
flannel duster.
- For stainless steel surfaces care use special means, that
create protective film.
- Do not use abrasive agents and solvents.
- Check fan air duct and ventilation channel condition,
clean them if necessary!
BACKLIGHTS REPLACEMENT
- press the filter lock and take off the fat filter;
- Unscrew an old lamp from the holder and screw the new
one;
- press the filter lock and install the fat filter into the cooking
hood.
33