WebGate C1080BL-IR48-AF Bedienungsanleitung Seite 7

ANTI-FLICKER
DSS
(OFF, x2~x10)
AGC
(7, 1~10)
COLOR AWB
CHROMA
(10, 0~20)
IMAGE SHARPNESS
(5, 0~10)
H-MIRROR
V-MIRROR
Digital ZOOM
PRIVACY
SHADING
quality at outdoor environment.
- Indoor-Anti Blur
performance at dark indoor environment, but the
brightness level decrease a little.
- Outdoor-Anti Blur : It shows better anti-blur
performance at dark outdoor environment, but the
brightness level decrease a little.
- Manual : It fixes shutter speed within 1/30 ~ 1/60000.
Removes Flicker problem due to the discordance of
light frequency.
At night time or very dark condition, it accumulates
the amount of light into the image pixels and provides
more clear video image. But the higher setting value
may make more severe motion blur accordingly.
It will amplify video gain according to the light
condition, but it will also increase noise level.
- AUTO : This mode automatically adjusts color white
balance between 1,700°K ~ 11,000°K.
- PRESET : Shoot a white paper in front of camera and
press MENU button then white balance working will
stop suitable for the condition. You must do this
process again if light condition is changed.
- MANUAL : User can select color temperature among
3300°K, 4300°K, 7600°K and adjust the details by
KELVIN, R-GAIN and B-GAIN value.
Adjust Chroma level.
Adjust sharpness. The higher value will show more
clear video image
Mirror image. Left and right will be reversed
Flip image. Up and down will be reversed.
Zoom image by 16 steps. (1~16)
This is for privacy zone masking
- ZONE NO : Supports total 28 areas (0~27)
- ZONE OP : Whether to use or not of selected area
- X, Y-POS : Set the X,Y start position of an area
- X, Y-SIZE : Set the width and height of an area
- COLOR(WHT,YEL,CYN,GRN,MAG,RED,BLU,BLK) : Select
color for masking.
- TRANS(0~4) : Set transparency of masking.
Before execute the SHADING function, shoot a white
7
: It shows better anti-blur