NightSearcher BeatLite 500 Kurzanleitung Seite 2

1
2
5
Charging:
- When you use the work light for the first time or if you have not used it for a long time, you need to fully
charge the work light for 4.5 hours.
- Remove the USB socket cover
adaptor/electronics device with maximum output of 5V).
- The battery indicator will blink during charging 6. When the light is fully charged all 4 blue indicators will lit up.
Pairing to the Bluetooth
- Press the Bluetooth
®
- The Bluetooth indicator light, above the battery indicator will flash.
®
- Ensure the Bluetooth
- The BeatLite 500 will beep to indicate it is connect to the music device.
- Turn the music on and the music will now play through the BeatLite 500 speakers.
- Use your mobile volume buttons to increase/decrease the sound level.
- Hold the Bluetooth
®
turn off.
- To reconnect to the same music player, just switch on the speaker by briefly pressing the Bluetooth
Operation:
- Press the power button
- Press the power button a second time to turn floodlight on (High).
- Press the power button a third time to turn the torch light on.
- Press the power button a fourth time to turn lamp light off.
Warning:
- Do not shine the lights directly into people's eyes, as it may damage their eyesight.
- Do not try to repair the unit or adaptor yourself. Please contact NightSearcher or an authorised distributor.
Safe disposal of waste electrical products and batteries:
If at any time, you need to dispose of this product or parts of this product: please note that waste electrical
products, bulbs and batteries should not be disposed of with ordinary household waste. Recycle where facilities
exist. Check with your local authority for recycling advice. Alternatively, NightSearcher is happy to take receipt of
this product at end-of-life and will recycle it on your behalf.
Guarantee Terms
All NightSearcher products have a 3-year standard warranty on all manufacturing defects from the date of
purchase. Extended Warranty: From 1st September 2018, customers have the option to extend the warranty
of the product to 5 years for manufacturing defects. Registration of the product must be made within one
month of purchase by sending us an email sales@nightsearcher.co.uk. In the message please state in your
own words that you would like to register your NightSearcher product for the extended warranty.
To view NightSearcher's warranty policy, please visit: http://nightsearcher.com/en/warranty.html or scan the
QR code.
NightSearcher Limited - Unit 4 Applied House - Fitzherbert Spur- Farlington - PORTSMOUTH - Hampshire - PO6 1TT - UK
3
4
and connect the micro USB cable to a power supply (only use USB
9
speaker:
®
button for 5 seconds to switch on the speaker.
3
is activated on your music device, connect to the 'Beatlite 500'.
®
button to switch off the speaker, and the device will bleep and the Bluetooth
once time to turn floodlight on (Low).
4
Narrow beam
1
6
Wide beam
2
Bluetooth
3
Power mode button
4
5
Bluetooth
5
Battery charging + status indicator
6
Bluetooth
Hanging hook
7
Magnetic stand
8
7
Charging Port
9
8
Product size
Product weight
button
®
speaker
®
indicator light
®
164x66x27mm NS Part No.
320g Supplied with
9
NSBEATLITE500
USB Charging cable
light will
®
button.
®