Charging The Device; Battery Maintenance - Velleman HPDSD Bedienungsanleitung

3. Use the buttons PRE, NEXT, PAUSE/PLAY to control playback.
Note: You can use the headphones with USB cable even if your PC does not
have a sound card.
6.5 Headphones with 3.5mm audio cable
• Connect the device to your audio set with a 3.5mm audio cable
(not included).
• Make sure the headphones are turned off. (If not, the
headphones will be in FM radio mode and will not play the music
on your computer).
• You can now listen to any music or movie playing on your
computer.
7. Battery

7.1 Charging the device

To charge the device:
1. Make sure the headphones are turned off.
2. Connect the headphones to your computer with the included USB
cable.
3. The charging indicator (CHE) lights up. The indicator will turn off when
the device is fully charged.
4. The device takes about 3.5 hours to charge.
Note: to charge the device more quickly, do not use it while charging.

7.2 Battery maintenance

•
The headphones contain an internal rechargeable battery. When
the device is end-of-life, this battery has to be removed and
disposed off according to local regulations.
• The battery is located inside the left ear pad (under the volume
buttons). To remove the battery, the housing of the headphones
must be broken. Wear sufficient and appropriate protection
(goggles, gloves...) when doing so.
WARNING: Do not puncture or throw batteries in fire as they
might explode. Keep batteries away from children.
V. 02 – 29/05/2012
HPDSD
6 ©Velleman nv