Cleaning And Maintenance; Technical Specifications - EuroLite TPC-52 Bedienungsanleitung

The maximum drop distance must never exceed 20 cm.
A safety rope which already hold the strain of a crash or which is defective must not be used again.
Before taking into operation for the first time, the installation has to be approved by an expert!

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
Observe prescribed testing deadlines:
1. Once a year by an expert
2. Every four years by a skilled person
3. Before every use for breakage and function by the operator
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Max. load: 400 kg
Weight: 0.8 kg
Max. service life: 10 years
Please note: Every information is subject to change without prior notice. 25.03.2004 ©
DANGER TO LIFE!
7/7 59006810_V_2_0.DOC