Gewiss GW 90 764 Handbuch Seite 16

- Parameterisation of behaviour when a timed activation command is received with
timing already active
- Setting the stair raiser light activation time from the BUS
LOCKOUT FUNCTION (*)
- Parameterisation of the lockout activation value, behaviour when lockout is active, and
behaviour when lockout is deactivated
- Setting the lockout object value upon download and upon BUS voltage reset
LOGIC FUNCTION
- Logic operation AND/NAND/OR/NOR with command object and result of logic operation
- Logic operations AND/NAND/OR/NOR/XOR/XNOR up to 4 logic inputs
- Setting the NOT operation on the 4 inputs
OTHER FUNCTIONS
- Parameterisation of the output behaviour upon failure and reset of BUS voltage
- Setting the transmission of information concerning the ON/OFF status and the current
light intensity percentage value
- Setting the transmission of information concerning overheating, auxiliary voltage failure
or polarity inversion
- Setting the transmission of information concerning the absence of auxiliary voltage
(with BUS voltage present)
- Setting PWM frequencies
- Setting output current values (CCD version) for each channel
- Setting local button key operation
(*) for each individual channel and 4 channels at the same time.
FRONT LED INDICATORS
No fault, load piloted
No fault, load off
Overheating
Returns below the temperature threshold
after overheating
Reset test after overheating
Auxiliary voltage polarity inversion
Absence of auxiliary voltage
GENERAL DESCRIPTION
16
Channel status
indicator LED
Fixed GREEN
Off
Off
Flashing GREEN
Flashing RED
Off
Flashing YELLOW
Fault signalling
LED
Off
Off
Fixed RED
Fixed RED
Fixed RED
Flashing RED
Fixed RED