AGPtek W06 Bedienungsanleitung Seite 7

the Apps. These messages will save in the message interface of watch. It can
store up to 3 message. If the watch has received over 3 messages, it will be
replaced the previous messages one by one.
5．Sleep Monitor
Record your sleep from 22:00 pm of the current day to 8:00 am of the next day.
The watch exits sleep monitoring mode after generating the data. The sleeping
data detected by the watch will be synchronized and updated to the "Sleep" in
App through manually pulling down the the "Today" interface of App.
6．Heart Rate & Blood Pressure Monitor
Find the Heart rate/Blood pressure interface, the watch will automatically
monitor your heart rate/blood pressure for about 30s. In addition, you can turn
on Continuous heart rate monitoring in App's "Device Management"(Mine -
Device Management - select to turn on "Continuous heart rate monitoring").
After that, the watch will automatically start to continuously monitor your heart
rate every 5 minutes, and synchronize the data to App.
Note:
1) When you are monitoring your heart rate in watch, the endurance of the
watch will decrease.
2) Although this product is used to dynamically detect heart rate in real time,
please keep your body inactive or stilly sit while detecting heart rate. Otherwise
the time for heart rate monitor will be prolonged or no data can be measured.
After the watch had gotten the measuring data, You can view the real-time
dynamic heart rate data or move. If there is a big difference in the measured
data, please take a break to re-measure. The average value obtained after 5
consecutive measurements will be more accurate.
5