Alarm Indication - Lynx MiniVib Handbuch

ENGLISH
Installation and function test
1. Start by installing the transmitters that are to be used. Read
the user manual for the transmitters that you are installing!
2. Test the system by activating the transmitters in the system
one at a time. MiniVib starts to vibrate and the alarm lamp
lights up. Check that the correct alarm is indicated
(see below).

Alarm indication

MiniVib can receive four different types of alarm. MiniVib
vibrates according to a certain pattern and the lamp for the
relevant alarm comes on. The vibration is repeated once.
The Alarm Call alarm can be replaced by another alarm, e.g. by
that from the Lynx Baby Alarm. Read the user manual for the
transmitters that you are installing!
Alarm
Fire
Alarm call
Door
Telephone
Check the previous alarm
Press the button briefly. The previous alarm comes on and
vibrates once.
NOTE: If you hold down the button for more than 6 seconds, you will switch
off Mini-Vib.
4
LED
(red)
(yellow)
(green)
(orange)
Vibration