Inhaltsverzeichnis
Werbung
Important notes for users in U.K.
Mains plug
This apparatus is fitted with an approved moulded plug.
Should it become necessary to replace the main fuse, this
must be replaced with a fuse of same value as indicated on
the plug (example 10A).
1. Remove fuse cover and fuse.
2. The replacement fuse must comply with BS1362 and
have the A.S.T.A. approval mark. If the fuse is lost,
contact your dealer in order to verify the correct type.
3. Refit the fuse cover.
In order to maintain conformity to the EMC directive, the
mains plug on this product must not be detached from the
mains cord.
Copyright in the U.K.
Recording and playback of material may require consent.
See Copyright Act 1956 and The Performer's Protection
Acts 1958 to 1972.
LASER
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION:
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCK DEFEATED. DO NOT STARE
INTO BEAM.
LOCATION:
INSIDE, NEAR THE DECK MECHANISM.
Werbung
Inhaltsverzeichnis
