Operation; Cleaning And Storage - Ribimex Sprizzy Bedienungs- Und Wartungsanleitung

2. OPERATION

2.1- Appropriate use:
- The product has been designed and constructed for indoor and outdoor domestic use.
- The product has been designed and constructed for the cleaning and polishing of different surfaces according to the
appropriate accessory assembled for the purpose
packaging).
- Never use the product in work for which it was not intended or described in the manual.
- The product is not intended for artisan, commercial, professional and/or industrial work.
2.2- Power switch
2.3-Starting
Starting the product:
1. Set the START/STOP power switch (1) in the "ON" position.
2.4- Stopping the product
In order to stop the product:
1. Set the START/STOP power switch (1) in the "OFF" position..
2.5- Use:
Recommendations for work:
- Always wear protective clothing adequate to the work to be performed.
- Grip the product tightly. Adopt a stable, balanced position.
- Never use the product from an instable position. This may lead to accident and injury.
- Keep your free hand free at a distance from the surface being worked. Never touch accessories while moving: some parts
may be cutting and create cuts.
Using the product:
Bring the accessory (with the cleaning brush or polishing accessory) close to the surface to be cleaned or polished.
We recommend using the appropriate polishing solvents for the surface to be polished (e.g. auto polish paste, leather
cleansing foam, etc.).
Never apply too much pressure.
Holding the grip tightly, move the product's body over the surface to be cleaned or polished.
Switch the product off when the surface is sufficiently clean or polished.

3. CLEANING AND STORAGE

Prior to every use, make sure that the Start/Stop power switch is in the "OFF" position and that
the battery charger is unplugged from the current socket.
Always wear safety gloves when working with the appliance or performing maintenance/cleaning.
Remember: Make sure to keep the product in good working condition, and perform routine maintenance after every use and
before setting it aside.
Inadequate or negligence in maintenance shortens the product's working life and increases the risk of malfunction and
accidents.
In order to preserve the safety system for the entire working life of the machine, it is very important for maintenance and
cleaning to be performed correctly. NEVER use non-conforming spare parts; never disassemble the machine by yourself, and
never modify its safety characteristics.
3.1- Change a cleaning or polishing accessory
Make sure that the product is being held firmly and that the
Follow the instructions provided in Point 1.2 Assembly above.
Never tighten excessively.
- Makes sure that all parts have been installed correctly.
3.2- Maintenance
Always wear safety gloves during the operation, setting, and cleaning of the product.
For safe and correct operation, make sure to always keep the product clean.
(see the list of optional accessories provided in this manual and the product's
START/STOP power switch (1) is in the "OFF" position.