CAME XDHD2704H Konfigurations- Und Bedienungsanleitung Seite 16

- PREFERRED DNS SERVER
- ALTERNATE DNS SERVER: this selection allows the DVR to be used/displayed remotely.
Press the NEXT button to continue with setup.
- FREE [GB]
- STATUS
- PROPERTIES
- SOURCES
Click on NEXT to display the status of the DVR.
Click on EXIT to end setup and exit the guided procedure.
When you click on the fields that require text or numbers to be entered,
a keypad is displayed; select the letters and/or numbers required
to compose the text; use the SHIFT key to enter capital letters and
symbols.
Press the NEXT button to continue with setup.
Entering network parameters
The pre-set values for the ports are:
HTTP port: 80
❶
❶
the device.
If box
- IP ADDRESS
- SUBNET MASK
- GATEWAY
Choice of type of video cameras connected
The video recorder supports video cameras with AHD, HDTVI and
CVBS technology. The factory settings mean that the video recorder
automatically detects the type of video camera connected; this
selection can be made manually, however.
Formatting disk
- ID
- TYPE
- SIZE [GB]
SERVER port: 6036
Tick this box for the system to automatically assign an IP address to
❶
is not ticked the following data must be entered manually:
If the HARD DISK has just been installed, proceed with formatting.