Installation - DJI FOCUS Handweel 2 Bedienungsanleitung

[1] Focus Wheel
Controls the camera lens.
[2] Stiffness Control
Adjusts focus wheel stiffness.
[3] Marking Ring
Provides a marking scale.
[4] Hard Stop Screws
Adjustable hard stops limit the focus wheel travel range.
[5] Power Switch
Toggle the power switch to power on/off the Focus Handwheel 2.
[6] Status LED/Backlight
Indicates the communication status and illuminates the marking ring from behind.
[7] LENS Button
Opens lens travel settings and switching between focus, aperture or zoom control,
subject to lens compatibility.
[8] DJI Rosette Mount
Used when mounting and securing the Focus Handwheel 2.
[9] Communication Port
Connects to the Osmo Pro/RAW.
[10] Pogo Pin
Connects to the Inspire 2 DJI Focus Handwheel 2 Remote Controller Stand for power
supply and communication. Ensure the Pogo Pin is clean and in good condition. Do not
cause the Pogo Pin to short-circuit.

Installation

Mounting on Inspire 2 Remote Controller
1. Attach the Focus Handwheel 2 to the Remote Controller Stand mounted on Inspire 2
remote controller (visit the official DJI online store for more information on the DJI Focus
Handwheel 2-Remote Controller Stand).
2. Connect the cable on the Stand to the Inspire 2 Remote controller to power the Focus
Handwheel 2.
5