Preparation Of The Camera Prior To Use; Sd Card; Recharging The Camera; Camera Power/Standby - E.zicom e.zixtreme Benutzerhandbuch

.EN.

6. Preparation of the camera prior to use

A. SD CARD
The e.zixtreme requires a Mini SD card or SDHC in order to save your media content. The maximum
accepted capacity is 32 GB.
Within the context of professional use with use of a 0.5 delay, a class 10 card is required.
Install the SD card into its compartment and make sure that the camera is turned off before
proceeding.
B. RECHARGING THE CAMERA
Before using it for the 1st time, make sure that the camera is fully charged. In order to do this, use
the supplied USB cable, and connect the camera to a computer. A complete charge takes about 4
hours. The camera's battery life will then be optimal, or a duration of about 1 hour.
The camera must be off to be recharged. During charging, the camera's LED light is blue.
Once fully charged, the LED light turns off.
C. CAMERA POWER/STANDBY
The camera is turned on using the button
. Press the button for approximately 3 seconds.
The camera automatically goes into standby mode after it has not been used for 5 minutes.
8