VENOM Cobra Benutzerhandbuch Seite 6

keystrokes or mouse buttons you need. You
can also edit the time delay; check-marking
the box above 'Start Record' will add a 50ms
delay.
5. When finished, click 'Stop Record', then click
OK to complete your macro recording.
6. Click 'Apply' on the main control screen. You
can now use your Macro.
Multiple Macros can be saved to each button
(Fig.2), which can be added or deleted as
required.
Note: Macros can only be recorded using
standard keys on your keyboard. Special
multimedia keys cannot be recorded. A Macro
command can store up to 50 moves (or 25
clicks, as pressing and releasing a button are
counted as 2 moves).
Customise CPI settings (Fig.3)
CPI means the count of mouse pixel movements
per inch, which defines the onscreen pointer
speed. Some games may require a higher CPI
rate for higher precision procedures. The Cobra
Mouse driver software allows you to customise
the CPI increments, which are then triggered by
the DPI switch button (it toggles between your
preferences).
1. Go to the Main Control window of the driver
software for the CPI switch function.
2. Move the on-screen slides to your preferences
(from 200-5,000 CPI).
3. Check-mark 'constrain to XY' to adjust
the same value for horizontal and vertical
movement.
4. Click CPI 1 to CPI 4 in order to activate (orange)
or deactivate (grey).
5. When finished click 'Apply' to save the
settings. The DPI swich will now toggle
between your chosen preferences.
Advance Settings
Click on the 'Advance Setting' window to
customise the following:
Polling Rate: Data Upload Speed Setting
This is the frequency of how often the mouse
reports back to the computer, the higher it is the
more accurate the mouse pointer. The highest
setting (default) is 1000 Mhz.
To reduce or change the setting, simply click your
preffered setting and then 'Apply'.
Scroll Wheel Speed
Modifiying the scroll wheel speed may be useful
depending on your application, for example web-
browsing versus the use of spreadsheets.
Double Click Speed
Modify the speed at which the mouse triggers a
double-click. The Cobra Mouse driver software
allows you test your settings before clicking
'Apply'.