Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Count Down Timer
NOTE: This setting is only for normal mode. It
set period of time.
3.2.13 Press
to cycle through the settings from Off and 0.5 hours to 9 hours. The timer logo
and time will show on the screen. The heater must be in the ON position.
he heater can be automatically run by using daily timer and weekly timer on the remote.
Set up Day, Time and Comfortable temperature
3.2.14 Press
to turn on the remote handset. Hold the button
setting screen.
3.2.15 Press the '←' and '→' button to choose Day, Time or your comfortable temperature. The
character selected will be highlighted.
3.2.16 Pressing the '+' and '-' button will adjust the number.
•
Time: 24-hour system
•
Select your comfortable temperature from 15-25℃.
•
Temperature unit: ℃、℉
Daily Timer Heating
3.2.17 The following are preset heating periods, which can be altered if desired.
06:00 until 08:30
17:00 until 22:00
3.2.18 Press
until
timer heating mode.
3.2.19 Hold the arrow symbol button
Max 3 timed heating periods per day.
•
Press '←' or '→' to choose hour or minute, press '+' or '-' to set the time.
•
Minute will increase/decrease by 15 minutes per press.
•
Hold
for 3 seconds or wait for 10 seconds to save and exit the heating time period
setting.
3.2.20 Adjusting the set temperature
•
Press the '+' or '-' button to increase or decrease the temperature on the basis of your
comfortable temperature setting.
•
ECO means 2℃ lower than your comfortable temperature setting, ECO- means 4℃ lower,
COMF+ means 2℃ higher, COMF++ means 4℃ higher.
3.2.21 To check your daily timer settings, press
3.2.22 If heating needs to be turned off, it will be necessary to go back to the Normal Mode to turn
off.
Week Timer Heating
3.2.23 The following are preset heating periods, which can be altered if desired.
From Monday to Friday
06:00 until 08:30
17:00 until 22:00
From Saturday to Sunday
06:30 until 09:30
11:00 until 13:00
17:00 until 22:00
3.2.24 Press
until
heating mode.
3.2.25 Hold
button for 6 seconds to enter the week timer setting.
•
Press '←' or '→' to move the cursor (a flashing underline), press the
•
the corresponding week position to select (the character is highlighted) or cancel
(the
•
character is displayed normally) the current setting. Several days can be selected
together.
allows the appliance to go into standby after a
shows at the upper right corner of the screen, then enter the daily
for 6 seconds to enter the daily timer setting.
shows at the upper right corner of the screen, then enter the week timer
for 3 seconds to enter the
.
button in
Werbung
Inhaltsverzeichnis
