Motor Setting; Limit Setup - Allbox lucky Benutzerhandbuch

When you enter "Transponder List"
menu you can see a window like the
one beside:
Press different buttons to add-
delete-edit and scan transponder.

1.4 Motor Setting

To set up the auto Satellite Dish and
generate the positioned system.
Select USALS or DiSEqC1.2 by Motor
Setting.
1.4.1 USALS Setup
To set up the USALS system onto
your STB.
If you have a USALS motorized
system, you must set your position
(latitude and
longitude) in order to calculate
all motor positions for viewable
satellites. You should refer to the
motor's manual.
1.4.2 DiSEqC1.2
Set motor setting as DiSEqC1.2 by
left or right buttons. If you have a
DiSEqC1.2 device, please connect it
with your STB, then enter this menu
to set your position.

1.5 Limit Setup

To set up your motor.
Channel
www.allbox.com.tr
7
E
N
G
L
I
S
H