Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quicklinks
Gaither Tool Company, Inc.
21 Harold Cox Dr.
Jacksonville, IL 62650, USA
T 217‐245‐0545 / 800‐452‐5010
F 217‐245‐0940
E sales@gaithertool.com
W www.gaithertool.com
Gaither Europe BV
Vijfhuizenberg 167
4708 AJ Roosendaal
Holland
T +31 165 554475
F +31 165 568691
E gaither.europe.bv@worldonline.nl
W www.gaithertool.com
#BB6L
Werbung
Verwandte Anleitungen für Gaither Bead Bazooka BB6L
Inhaltszusammenfassung für Gaither Bead Bazooka BB6L
- Seite 1 #BB6L Gaither Tool Company, Inc. 21 Harold Cox Dr. Jacksonville, IL 62650, USA T 217‐245‐0545 / 800‐452‐5010 F 217‐245‐0940 E sales@gaithertool.com W www.gaithertool.com Gaither Europe BV Vijfhuizenberg 167 4708 AJ Roosendaal Holland T +31 165 554475 F +31 165 568691 E gaither.europe.bv@worldonline.nl W www.gaithertool.com ...
-
Seite 2: Replacement Parts List
Gaither’s Bead Bazooka™ ( BB6L ) Bead Bazooka Accessories Replacement Parts list Ref. No. Part No. Description 12910 B Air Tank w/piston valve inside 12913 B Slotted Barrel GB-55 Well Clip w/2 screws 12912 B 1 1/2 Lock Nut GB-51... - Seite 4 GB-55 Well Clip w/2 screws Storage Clip For Bead Bazooka...
- Seite 5 Set‐up of your new Bead Bazooka™ (BB6L) unit CAUTION: AFTER THE BEAD HAS BEEN SET TO THE WHEEL, STOP THE AIR FLOW TO THE VALVE STEM, PLACE A VALVE CORE IN THE STEM, AND MOVE THE TIRE / WHEEL ASSEMBLY TO A TIRE INFLATION CAGE AND THEN CONTINUE INFLATING TO THE MANUFACTURER’S RECOMMENDED OPERATING PRESSURE. Using the Bead Bazooka™ with the tire/wheel assembly in a vertical position: (recommended for truck tires only) 1) Adjust slotted double barrel so that the barrel flange is on the bottom same side as the handle stock with trigger release (opposite side of the pressure gauge) and parallel to the ground. Make sure the barrel is fastened tightly with the lock nut. 2) Place tire/wheel assembly against a wall or solid prop so the bottom (or back bead) is already set to the wheel. (see diagram #3) Make sure the valve stem is pointing out and the long side of the wheel is closest to you. The Gaither Tire Wedge (GB‐53) can be used as a prop to help set the bead properly. Before using the Bead Bazooka™ you must install the following: 3) Attach an airline to your air coupler nipple and open the intake valve to fill the air tank to the desired working 1) The air coupler nipple is not included. Install an air coupler nipple that fits your particular system into the pressure. (see proper storage and unit charging recommendation –next page) Normal working pressure in small intake valve (a) pictured above. the vertical position is from 50 to 110 psi / 1.5 to 8 Bar. The amount of pressure that is needed in the tank 2)The slotted double barrel (b) must be installed into the large release opening shown in the above diagram. depends on the tire size and condition of the tire. Install and secure lock nut so that the slotted double barrel is securely tightened. 4) Using two hands; one on the handle stock with trigger release and the other on the handle which is on top of Using the Bead Bazooka™ with the tire/wheel assembly in a horizontal position: the tank, direct the slotted double barrel flange to the wheel exactly opposite the valve stem. Once you are 1.Adjust the slotted double barrel so that the barrel flange is on top (opposite side of the handle stock and trigger in position to fire the Bead Bazooka™ you may want to bring the barrel away from the wheel approximately release) and parallel to the ground. 1” to 2” so that the barrel does not contact the bead as it 2.Place the tire (any size up to medium commercial truck tire) so that the short side of the wheel is on the bottom quickly rises from the force of air flow. Make sure that and the long side of the wheel is on the top. (see diagram #2 below) The valve stem should be pointed upward to there is no valve core in the valve stem and using an the sky. At this point the Gaither tire stand (GB‐51) or block of wood should be holding the tire and wheel off the airline or the Gaither Whip Hose (GB‐52) apply a steady ground and the bottom bead should already be seated properly. (Note: to ensure proper and perfect bead seat, tire flow of air into the valve stem while simultaneously firing and wheel should always be adequately lubricated) the Bead Bazooka™. ...
- Seite 6 Rohr den sich durch den schnellen Luftstoß hebenden Reifen nicht berührt. Kontrollieren Sie, dass sich aufsitzt, wiederholen Sie den Vorgang mit einem höheren kein Ventileinsatz im Ventil befindet, und lassen Sie über einen Luftschlauch oder über die Gaither Whip Hose (GB Luftdruck.
- Seite 7 (Véase el gráfico número 3). Asegúrese de que el vástago de la válvula apunte hacia fuera y el lado largo de la rueda esté lo más próximo posible a usted. Se puede utilizar una cuña de neumático Gaither (GB-53) como apoyo para ajustar el talón correctamente.
- Seite 8 Utilisez un tuyau de gonflage ou un La tubulure de valve doit être dirigée vers le haut. Le porte-pneumatique Gaither (GB-51) ou une cale en bois doit être placé pour tuyau Gaither Whip Hose (GB-52) pour gonfler le pneu tout en maintenir le pneu et la roue hors de contact avec le sol et le talon du bas du pneumatique doit être déjà...
- Seite 9 (vedere schema #3) Assicurarsi che lo stelo della valvola sia sporgente verso l’esterno e che il lato lungo del cerchio sia vicinissimo a voi. È possibile usare un cuneo per pneumatici Gaither (GB-53) come ausilio per alloggiare correttamente il tallone.
- Seite 10 (zie tekening 2 hieronder). Het ventiel moet omhoog wijzen. toe te voeren terwijl u tegelijkertijd de Bead Bazooka™ Zorg dat de Gaither bandstandaard (GB-51) of een blok hout de band en de velg van de grond houden en dat de afvuurt.
- Seite 11 GB-51 KD Tire Stand goggles & ear plugs 12919 Spiral Hose 12913 Double Barrel GB-55 Well Clip w/2 screws 12913B Slotted Barrel Storage Clip For Bead Bazooka 12913P Passenger Barrel GB-52 Air Whip Hose 12904 Super Slick’em 12954 Gaither Slick’em GB-53 Tire Wedge...
- Seite 12 #BB6L Gaither Tool Company, Inc. Gaither Europe BV 21 Harold Cox Dr. Vijfhuizenberg 167 Jacksonville, IL 62650, USA 4708 AJ Roosendaal Holland T 217-245-0545 / 800-452-5010 T +31 165 554475 F 217-245-0940 F +31 165 568691 E sales@gaithertool.com E gaither.europe.bv@worldonline.nl W www.gaithertool.com...