Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PUSH IN connector BLF 7.62HP
conductor entry
spring clamp
Delivery status:
• The push-buttons (slider/pusher) are not engaged, the clamping units are closed.
Recommended tool:
• Screwdriver blade 0,6 x 3,5 x 100
• Screwdriver blade standard DIN 5264
Connecting flexible conductors:
1. Opening clamping unit: Press the screwdriver individually onto the push-button (slider/pusher) and hold the screwdriver in this position.
Press the screwdriver into the appropriate slot and avoid any rotational movement or torsion of the screwdriver.
A lateral leverage of the actuator is impermissible.
2. Connecting conductor: Plug in the conductor into the clamping unit up to the end stop.
3. Closing clamping unit: Lock the clamping unit by releasing preassure onto the push-button (slider/pusher). Make sure that the conductor is inserted up to the
end stop and ensure by gently pulling on the conductors that the clamping unit is securely engaged.
push-button (slider/pusher)
We reserve the right to make technical changes. Personal support can be found on our website: www.weidmueller.com/contact
Werbung
