Inhaltsverzeichnis
Werbung
English Manual
5.5 Click Next to continue, to copy the needed files to your hard disk.
5.6 When Windows® finished installing the software required for the new USB to Parallel
Bridge, click Finish.
6. Setting Up the Printer Device
Follow the steps below on how to connect your printer to the USB port of your PC:
6.1 Turn off your printer. Plug the centronics connector of the USB to Parallel printer
cable into your printer. If you have a parallel cable connected to it, remove the cable
and replace it with the USB to Parallel printer cable. Turn on the printer afterwards.
6.2 Turn on your computer and plug in the USB connector of the USB to Parallel printer
cable into the USB port.
6.3 If you have already installed a printer device before, click Start, Settings, and Printers.
Click right button of your mouse on the default installed printer and click on
Properties. The Properties dialog box of the installed printer will appear on your
screen.
6.4 Click the Details folder tab and change the printer port to LPT2: (USB to Parallel
Port).
Werbung
Inhaltsverzeichnis
