Possible Problems And Solutions - asalvo 12623 Bedienungsanleitung

A08 A09
A10 A11 A12
EN
A09- Push the central part of the travel cot downwards as shown in the photo.
A10 - The structure of the travel cot is now assembled successfully.
A11- Put the mattress down and with help of the Velcro pass them tapes through each
slot to fix it firmly to the base.
A12 - If you want to use the elevator, place the tubes as shown in the photo
To place the changer, use the zipper placed in it, in one of the headboards of the travel cot.
The changer to the cradle using the zipper.
Note: When using crib, the mattress must be in the lowest position and firmly subject to
the base. In case of using elevator, must be firmly subject to this before being used.

POSSIBLE PROBLEMS AND SOLUTIONS

A13 A14
A13- Problem - As in the photo.
A14- Solution - Hold the base tape and lift. Then repeat steps A02-A03-A07-A08-A09.